Morley Heavy Duty Spray Adhesive - A1
|
| Part Number: |
MA1 |
![[Technical\Safety Data Sheet]](datashtdk.gif) |
|
|
|
|
|
|
The Morley Heavy Duty Spray is truly heavy duty. It is a
multi-functional adhesive used for the perimeter fixing of most
types of carpets, tiles, underlays & associated products. It is
CFC free and has an adjustable nozzle, allowing different
thicknesses of band to be sprayed.
USES It is used to fix foam backed carpets, carpet tiles, carpet
and foam underlays, felt textiles and fabrics.
SUBFLOORS Suitable subfloors include concrete,
sand/cement screed, smoothing underlayment, plyboard,
flooring grade chipboard, hardboard, wood and existing well
bonded resilient flooring. Note: There are certain grades of
flooring grade chipboard that have been treated with paraffin
wax to provide a waterproof quality. These types of chipboards
are not suitable for use with this adhesive With existing well
bonded resilient flooring care must be taken to ensure the
subfloor under the resilient flooring is sound and the surface of
the resilient flooring is thoroughly cleaned of any polish etc. If
this cannot be done, the existing resilient flooring must be
removed and the subfloor made good before proceeding.
PREPARATIONEnsure that surfaces are clean, dry and dirt
free. Shake can well before use.
APPLICATION Spray the adhesive evenly from a distance of
10-20cms. For a strong bond, spray a number of light coats on
both surfaces. For a lighter bond apply to one surface only.
Allow approx. 1-5 mins for the adhesive to become tacky, then
press surfaces together firmly, working outwards from the
centre to adhere a good bond. Excess adhesive can be
removed with white spirit.
HEALTH & SAFETY PRECAUTIONS Refer to Material Safety
Data Sheet and follow the advice given.
Ensure area of use is well ventilated.
Avoid prolonged contact with skin and if sensitive, use barrier
cream or gloves.
In case of contact with eyes, mouth or nose, rinse with plenty
of water and seek medical help.
If adhesive is spilled, remove and dispose of it in accordance
with national and local regulations for waste materials.
Technical SpecificationsProduct Code: A1
Product Name: Heavy Duty Spray Adhesive - A1
Open Time: 1-5 mins depending on temperature, humidity and
sub floor porosity
Storage: Store between temperatures of 5°C and 25°C
Shelf Life: 12 months in unopened containers, stored in
recommended conditions
Cleaning: Overspray can be removed with a small amount of
white spirit. Always test before going ahead
|
Morley Fast Setting Gripper Adhesive - A17
|
| Part Number: |
MA17 |
|
|
|
|
|
|
|
|
|
![[Logo Image]](adhesives_-_morley_full_1.gif){kind=small}
